Lectrosonics UH200c Manuel d'utilisateur télécharger pdf (Page 8)

SPECIFICATIONS AND FEATURES

Operating frequencies:

Frequency selection:

RF Power output:

Pilot tone:

Frequency stability:

Deviation:

Spurious radiation:

Equivalent input noise:

Input level:

Input impedance:

Input compressor:

Gain control range:

Modulation indicators:

Controls:

Audio Input Jack:

Battery:

Battery Life:

Weight:

Dimensions:

Emission Designator:

470 to 608 MHz, 614 to 806 MHz

256 frequencies in 100kHz steps

100 mW (nominal)

32.764 kHz (± 2Hz); 5kHz deviation

± 0.002%

± 75 kHz (max)

90 dB below carrier at frequencies less than 1GHz

-126 dBV

Nominal 2 mV to 300 mV, before limiting.

Input greater than 2V, with limiting.

1K Ohm mic load impedance

Soft compressor, >30 dB range

43 dB; semi-log rotary control

Dual LEDs indicate modulation level 12 dB below limiting and at the

onset of limiting.

3-position “OFF-MUTE-ON” slide switch for noiseless turn on/turn

off operation. Control panel knob adjusts audio gain. Rotary

switches on side panel adjust transmitter frequency.

3-Pin XLR

Precision compartment auto-adjusts to accept any known alkaline

or lithium 9 Volt battery. (We’ve tried 150 different ones!)

4.5 Hours with alkaline 9 Volt, 12 hrs with lithium

6.6 ozs. including battery

1.5 x 1.5 x 4.2 inches

180KF3E

Specifications subject to change without notice.

1 2 3 4 5 6 7 8 9 10

Commentaires sur ces manuels

Pas de commentaire

Lectrosonics UH200c Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires de communication Lectrosonics UH200c