Installation and Quick Start Guide
Rio Rancho, NM
17
Set up the inputs for the microphones with the gain
value set to achieve 0 dBu on the meter during speech.
Select mixer
Inputs tab
Audio level meter
Route the microphone inputs to Mix 1 and Mix 2 on
subsystem A and Mix 3 and Mix 4 on subsystem B
under the matrix tab (subsystem A shown).
Select mixer Matrix tab
Select the source signal to be delivered to the outputs.
• ForsubsystemA:Mix3toOut3;Mix4toOut4
• ForsubsystemB:Mix1toOut1;Mix2toOut2
Select mixer Output Source tab
Assign Dante receive channels 3 and 4 to Mixes 3 and
4 respectively in the SPNDNT processor in subsys-
tem A and Dante channels 1 and 2 to Mixes 1 and 2
respectively in subsystem B (subsystem A shown)
Select SPNDNT
Matrix tab
Select the signal sources to deliver audio to the net-
work from The SPNDNT in each subsystem.
• ForsubsystemA:Mix1forOut1
• ForsubsystemB:MIx2forOut2
Select SPNDNT Output Source tab
Create Dante subscriptions in a diagonal pattern: 1:1,
2:2, 3:3, 4:4.
Commentaires sur ces manuels